Wednesday, June 8, 2011

sheet metal screws

sheet metal screws. hex sheet metal screws sz:
  • hex sheet metal screws sz:



  • signin241
    07-24 07:21 PM
    Hello,

    I have an unfortunate situation. My parents names are misspelled in the Birth certificate compared to the Passport parents name page. Do we need to submit the parents names page of the passport when we submit our documents for 485 ?? Please let me know if this will be a problem and if there is a work around for this ??

    Also if I have a Birth certificate (with my actual full name - dated in 2007 though), do I need to submit the affidavits ??


    Thanks





    sheet metal screws. bag of sheet metal screws
  • bag of sheet metal screws



  • getrdone
    01-16 05:19 PM
    One more thing before you draft a letter take a look at the job description/qualification/experience required which is filed along with the
    labor certificate.

    if possible get those "experience required " in the experience letter from
    prvious employer to show that you had those experiences before you joined.

    Cheers !


    I received a RFE on experience letters (EB3). I have searched everywhere but haven't found the format for a winning experience letter.

    Can someone with an approved 140 please paste a format of the experience letter on this thread?

    Thanks!





    sheet metal screws. Sheet Metal Screws
  • Sheet Metal Screws



  • ssnd03
    07-20 01:33 PM
    RIP 'Labor Substitution' is the best thing happened ever happened so far!!!

    Even with all pending I485s, USICS will not be able to predict yearly usuage or forward date movement with 10%-15% unpredictability or delay in FBI name-check. I expect upto 10% loss of annual visas every year.

    It remains to be seen how many visas are lost in FY 2007 even though they say "Unavailable". I expect them to return those allocated visas to DOS for which they thought FBI checks will be over shortly. I am sure these visas will be lost yet again.





    sheet metal screws. Stainless steel sheet metal
  • Stainless steel sheet metal



  • gimme_GC2006
    09-06 08:06 AM
    For USCIS all desi's lookalike :p

    hehhehhe..good one :D



    more...


    sheet metal screws. Stainless steel sheet metal
  • Stainless steel sheet metal



  • franklin
    12-11 02:30 PM
    Everyone knows the you don't get something for nothing.

    The Omnibus Bill is the most positive movement we as a green card hopeful community will have for some time.

    Please contribute for your sanity and long term stability.

    I know the feeling of relief that a greencard brings, but I still believe others need help. I've contributed for you. Now its your turn to help yourselves.

    Please contribute.





    sheet metal screws. sheet metal screws in
  • sheet metal screws in



  • johnamit
    08-30 01:08 PM
    more details will help. Is the case is as simple as it sounds then may be half of filers will get RFE. There got to be more pieces to it, is there H1/F1/H4/L1 transfer exists? I-140 aprroved? etc. Think about other points that makes your case out of the heap.



    more...


    sheet metal screws. See larger image: Sheet metal screws. Add to My Favorites. Add to My Favorites. Add Product to Favorites; Add Company to Favorites
  • See larger image: Sheet metal screws. Add to My Favorites. Add to My Favorites. Add Product to Favorites; Add Company to Favorites



  • averagedesi
    08-27 08:24 PM
    The only way I got to a rep is not choosing any option, the system assumes you are on rotary dial and connects you to a human





    sheet metal screws. Small Phillips Oval Sheet Metal Screws #3 x 7/32quot; 100CT | eBay
  • Small Phillips Oval Sheet Metal Screws #3 x 7/32quot; 100CT | eBay



  • arjunram
    04-22 10:24 PM
    so if someone mailed on jun 30th and the status online says received on july 26th does it mean that they are not processing these dates as yet? Im kinda confused!



    more...


    sheet metal screws. sheet metal screws
  • sheet metal screws



  • GCforever1
    09-15 01:08 PM
    wow !!! freedom when your wife is in India ....go to strip bar and have fun:) you need to enjoy

    Any ideas? (My wife and son are in india now).
    Anyway, I will support IV wholeheartedly going forward. Of course, I got benefitted from it. I am a long timer, 2001, EB3.





    sheet metal screws. See larger image: sheet metal screws. Add to My Favorites. Add to My Favorites. Add Product to Favorites; Add Company to Favorites
  • See larger image: sheet metal screws. Add to My Favorites. Add to My Favorites. Add Product to Favorites; Add Company to Favorites



  • gcisadawg
    08-11 04:14 PM
    bump

    done. EB3-I Oct 2003



    more...


    sheet metal screws. by sheet metal screws.
  • by sheet metal screws.



  • gjoe
    08-21 10:23 AM
    ^^^bump^^^

    For Rfc





    sheet metal screws. sheet metal screws #8.
  • sheet metal screws #8.



  • rsdang
    08-01 12:54 PM
    Guys,

    I like the approach however I will request all Iowa residents to call Congressman Kings again and again. Also get your friends and coworkers to call.

    Voter calls will always impact politicians...

    Lets keep the efforts on...

    Thanks



    more...


    sheet metal screws. several sheet metal screws
  • several sheet metal screws



  • freddyCR
    July 27th, 2005, 05:24 PM
    I never clone imperfections on flowers...I do on faces , though. :)





    sheet metal screws. SHEET METAL SCREWS
  • SHEET METAL SCREWS



  • sai
    07-09 11:37 PM
    I am in the same boat..
    If we have a gap between the expiry and new EAD card,
    we should not work thats for sure,
    but wont have any issues of going out of status during the gap?



    more...


    sheet metal screws. Sheet metal screws have a
  • Sheet metal screws have a



  • tabletpc
    08-24 03:08 PM
    Is it true that if we apply for candadian PR we can't apply for visitors visa to cananda.

    I want to apply for PR to canada and also would like to go for stamping to cananda sometime after 4-5 months.

    Thanks in advance...





    sheet metal screws. Sheet Metal Screws Hex
  • Sheet Metal Screws Hex



  • bodhi_tree
    12-15 10:32 AM
    I have been interviewed a couple of times at a very good stable company and the engineering manger seem to like my skill sets and experience. The issue is the company has no previous experience with H1 visa whatsoever....They haven't said they wont do it..but they are bit edgy in terms of how legally involved it would be...I have a final interview with the HR boss next week and am looking for ideas to quell their H1 anxiety...

    I'd appreciate if some one can point to any websites/documents/ideas...some thing to show the HR guy that its not as complex or involved process and they are perceiving it to be would be great..



    more...


    sheet metal screws. Stainless steel sheet metal
  • Stainless steel sheet metal



  • botol123
    10-17 09:08 PM
    The USCIS has returned the my entire package - I-140, I-485, I-131 and I-765 - to my lawyer by mistake.

    The package was received at the Nebraska Service Center on July 2nd received by J Barrett at 10:25 AM. Nebraska follows a policy of transferring a certain number of their cases to the Texas Service Center to help with the work. So mine went to Texas.

    Texas sent it back to my lawyer with a standard form letter telling us that we have to send it to the office that has proper jurisdiction, i.e. the Nebraska Service Center. The letter date shows 10/05/2007. The I-485, I-131, I-765 applications, and I-140 petition have notes with the dates July 2 and July 3 in them.





    sheet metal screws. SHEET METAL SCREWS
  • SHEET METAL SCREWS



  • rvr_jcop
    02-16 03:49 PM
    I am working in US from Feb 2007 to till date. I was on H1-B visa This H1-B petition is valid till 30 sep,2009. I am currently on project which ends on 31 March 2009 . Before that I want to change my employer .
    Some ppl suggested me Transfer H1 with extention immediately. Some said that stay with current employer have extention and then transfer .
    Is there any problem now a days for H1 Transfers ?
    Please give me your valuable suggestions.



    Thanks...

    There are about 90% chances that you will get RFE with the extension.Lets say there are about 50 to 60% cases those are getting approved without any RFE. In either case does this answer helpful to you?

    I guess, NOT. You should make the decision based on your new job/employer. If you have everything in place, and you never been out of status, filed LCA according to the rules in the past, employer played by the rules, both past employer and the future, you should not have any issues with the extension.

    Nobody can say do this or do that. End of the day, its all yours. PLEASE FILL UP your profile.





    sheet metal screws. sheet metal screws.
  • sheet metal screws.



  • paskal
    02-22 06:14 PM
    Not sure if people understood the question. Based on this data it shows India got much more then what was in the quota and there were more GC given than the yearly total limit. If this is true, why do I keep hearing that in forums that there were 250K visa's over the last 5 years that were lost because they GC's were not processed in time? If anything there were more visa's given and a disproportionately higher # for India.

    suggest you read the ombudsman report.
    and yes the numbers available were higher because
    1. a recapture was in progress
    2. recaptured visas were fifo not by country quota

    and country quota is deceptive. when ROW is current, eg last july, uscis gives out GC numbers by fifo availability not by country quota.
    of course last july was a freak...not coming back anytime soon!





    desi3933
    03-02 06:42 AM
    Thanks for you valuable information.

    My last entry was on Mar 2008. So as per your reply, even if i have less pay on my W2 for 2006 it wont effect my H1 transfer?

    Kindly reply

    Thanks
    Tiger



    As I said before, one needs to show that he/she is maintaining status since last entry only. Your attorney should know this.


    ____________________
    Not a legal advice
    US citizen of Indian origin





    whiteStallion
    10-09 02:23 PM
    I used my H1B since that had a further date of expiry than my EAD but when my next renewal comes up I guess I will have to show EAD as my H1B will be in process of being renewed then.......

    Might have to keep alternating if you have a choice......its kind of an irritant for sure........DMV has no issues with our status when they want us to renew our registrations :mad:

    If I am paying my taxes as a resident then I should get the same benefits... :rolleyes:

    I completely agree with you but I afraid things are only going to get worse, just like the US economy, for the immigrants...



    No comments:

    Post a Comment